Technogym Run Excite 700 - Format P&P

RUN EXCITE: Service & Maintenance Manual - rev. 1.5
Page 9.6
CONFIRM ?
sing the CLEAR key for a few seconds.
his function formats a TGS key for Plug&Play mode operation. To select the function, when the
LED matrix shows:
y for a few
econds to exit. The CLEAR key can be pressed at any time to interrupt the procedure and revert to
press ENTER to confirm, or cancel by pres
9.1.15. FORMAT P&P
T
FORMAT P&P
press ENTER to confirm. At the end of the format procedure, hold down the CLEAR ke
s
standby mode.