RUN EXCITE: Service & Maintenance Manual - rev. 1.5
6.2.1.7. Reset Result
This function clears the output of the Test Results viewing function, resetting the outcomes of all
the tests to KO.
6.2.2
This section groups together tests for manually checking the operation of certain peripheral devices.
After le – speed keys, press ENTER to access the tests.
To ex e w seconds.
.
operly.
. MANUAL TEST
se cting the desired test item using the + and
it t st mode, hold down the CLEAR key for a fe
The various manual tests are described below.
6.2 2.1. Man. Keyboard Test
The manual keyboard test checks the functioning of all the keys on the keyboard. After accessing
the test by pressing ENTER, the message “Press all buttons (beep=OK)” appears on the display.
Pressing each key will produce an audible signal, if a key does not produce the “beep” it means it is
ot working prn
Page 6.9
To Next Page
Loading...
