RUN EXCITE: Service & Maintenance Manual - rev. 1.5
9.3.9. TV STANDARD
the machine. To change the selection when
e LED matrix shows th
Press the +/- GOAL keys to select the desired language from the options available. Press ENTER
to confirm the choice, use the + or – speed keys to move to the next or previous parameter.
The alternatives are:
NTSC M44
T
th
his function displays the TV Standard configured on
e current setting:
TV STANDARD: XXX
PAL B/G
PAL I PAL D/K
PAL N SECAM B/G
NTSC M SECAM K1
SECAM E/L PAL M
SEC
AM D/K
Selected as a function of
9.3.10. MAINS VOLTAGE
This function allows the user to choose the proper power supply voltage for the machine. To change
the selection when the LED m
Press the +/- GOAL keys to select the desired Voltage Setting from the options available. Press
ENTER to confirm the choice, use the + or – speed keys to move to the next or previous parameter.
The alternatives are:
the country where the machine is installed according to Table 4-1.
atrix shows the current setting:
MAINS VOLTAGE: XXX
0
110 VAC
220 VAC
Choosing “0” value, each time the machine is sw
voltage provided by the electrical mains line.
itched on it is necessary to insert the power supply
Page 9.25
To Next Page
Loading...
