RUN EXCITE: Service & Maintenance Manual - rev. 1.5
Page 9.20
MESSAGE ON DISPLAY DESCRIPTION
Life AC M: Minutes x 10 of tread belt motor operation
Life DC M: Minutes of elevation motor operation
Life Kit H: Minutes x 10 of operation of the upper assembly
Life Kit L: Minutes x 10 of operation of the lower assembly
T Total km traveled ot. Km:
By selecting one of the items in the above table it is possible to modify its content, but only after
aving cleared its value. When the ENTER essage “Reset life...” appears,
followed by the name of the selected ite R again resets the value of the selected
.3.5. ERRORS LOG
This function accesses the machine’s error history g. To access this menu, when the LED display
ress ENTER. This function is structured as follows:
h key is pressed the m
m; pressing ENTE
item, while pressing CLEAR reverts to the old value.
9
lo
shows:
ERRORS LOG
p
ERRORS LOG
Error 10
Error 1
RESET ERRORS ?
READ FROM
LOW KIT ?
.......................
In addition to the error history log, this fun es the 2 sub-functions described below:
o read the error history log from the low kit memory to view it on the display, scroll using the +/-
keys until the LED dis
READ FROM
press ENTER to read the errors from the low ki eturn t enu level by pressing
LEAR for a few seconds.
ction also includ
9.3.5.1. Read from low kit
T
play shows:
LOW KIT ?
t, and r o the upper m
C
To Next Page
Loading...
