Technogym Run Excite 700 - Low Kit Parameter Configuration

RUN EXCITE: Service & Maintenance Manual - rev. 1.5
TIMES AND DATE
Day (DD)
Minutes (MM)
SET CLOCK ?
Month (MM)
Year (YYYY)
H HH)
9.3.1.1. Hour
This parameter sets the hour of the internal clock.
9.3.1.2. Minutes
This parameter sets the minutes of the internal clock.
9.3.1.3. Day
This parameter sets the date of the internal clock.
the internal clock.
e chip of the internal clock with the previously configured
alues. To do this, when the LED m
achine. To access this menu, when the LED display
ollows:
ours (
9.3.1.4. Month
This parameter sets the month of the internal clock.
9.3.1.5. Year
This parameter sets the year of
9.3.1.6. Set Clock
his item is used for programming thT
v atrix shows:
SET CLOCK
press the ENTER key.
9.3.2. LOW KIT PARAMETER
This function provides access to parameters used for modifying certain settings of the lower
ssembly, or for monitoring the state of the ma
shows:
LOW KIT PARAM.
press ENTER. This function is structured as f
Page 9.15