Technogym Run Excite 700 - Read from Low Kit; Write to Low Kit; Default Setting

RUN EXCITE: Service & Maintenance Manual - rev. 1.5
Page 9.16
LOW KIT PARAM.
Par.13
Par.01
WRITE TO
LOW KIT ?
DEFAULT
SETTINGS ?
READ FROM
LOW KIT ?
.......................
addition to the 13 configuration parameters, this function also includes the 3 sub-functions
described below:
9.3.2.1. Read from low kit
To read the parameter values from the low kit memory to view them on the display, scroll using the
+/- keys until the LED display shows:
READ FROM LOW KIT ?
press ENTER to read the parameters from the low kit, then return to the upper menu level by
pressing CLEAR for a few seconds.
9.3.2.2. Write to low kit
To write the values of the currently displayed parameters to the low kit, scroll using the +/- keys
until the LED display shows:
WRITE TO LOW KIT ?
press ENTER to write the parameters to the low kit, and return to the upper menu level by pressing
CLEAR for a few seconds.
9.3.2.3. Default setting
To load the default parameter values to the display, scroll using the +/- keys until the LED display
hows:
DEFAULT SETTING ?
ult parameter values, and return to the upper menu level by pressing
In
s
press ENTER to load the defa
CLEAR for a few seconds.