EasyManua.ls Logo

Teka THZ 375 - Emissions; 2.11.4.1 Noise; 2.11.4.2 Dust; 2.11.4.3 Vibration

Teka THZ 375
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 21 of 957.10-00110b_en
Safety
2�11�4 Emissions
2.11.4.1 Noise
Mixing can result in increased noise. Wear hearing protection.
For the measured sound pressure level, see chapter "3 Technical data".
2.11.4.2 Dust
Mixing causes dust.
Use a suction system or air equalization system. If you observe the prescribed usage infor-
mation for the machine as specied in the operating instructions, dangerous concentration
values will not arise.
Use personal protective equipment.
2.11.4.3 Vibration
Mixing causes vibration.
Ensure that machine operators have a vibration-absorbing workplace if the permanent
workplace is connected with the mixer.
Instruct personnel on the dangers of vibration.
2�11�5 Operating materials and consumables
Observe safety regulations for oil, grease, and other chemical substances.
Take care around operating materials and consumables. Risk of burns and scalds.
Avoid leaks; carry out checks.

Table of Contents