Teka THZ 375 - Discharge Protector; 2�14 Prohibition of Unauthorized Alterations and Additions

Page 28 of 95
7.10-00110b_en
Safety
2�13�3 Discharge protector
I DANGER!
Risk of impact and crushing!
► Before removing safety equipment, observe the electrical
safety precautions:
► Switch the machine o󰀨 using the main switch.
► Secure the machine so that it cannot be turned back on
unintentionally.
In the case of the dust-tight version of the machine, the discharge protector has an inspection
ap.
There is a discharge protector on the mixing trough to protect against the risk of impact and
crushing due to the discharge slide moving out.
If this does not form part of the scope of supply of TEKA Maschinenbau GmbH, it must be at-
tached by the operating company in accordance with accident prevention regulations.
The mixer is not allowed to be placed into operation without a discharge protector.
1
Fig. 22: Discharge protector
1 Discharge protector
2�14 Prohibition of unauthorized alterations and additions
Unauthorized alterations and additions can have unforeseeable consequences for safe-
ty. For this reason, alterations and changes are prohibited without the express consent of
TEKA Maschinenbau GmbH.