Teka THZ 375 - Nameplate; Technical Data

Page 30 of 95
7.10-00110b_en
Technical data
3�2 Nameplate
The name plate of the THZ mixer is on the outer wall of the mixing trough.
Fig. 23: Nameplate
NOTE
► Thenameplateisano󰀩cialrecordthatisnotallowedtobe
changed or removed�
► Damaged or illegible nameplates must be replaced immediately�
► You are not allowed to operate the machine without a name-
plate�
3�3 Technical data
The following are enclosed with the spare parts list:
● Datasheetsforthemixer,containingitsmaindimensionsandperformancespecications
● Data sheets for the transmission
● Data sheets for the electric motors
● Inaddition,notethespecicationsintheorderconrmationanddesigndrawingforthe
mixer.