Page 3 of 957.10-00110b_en
General information
1�3 Used abbreviations
Abbreviation Meaning
DD Design drawing
1�4 Using the operating instructions
These operating instructions contain important information that enables the safe and proper
assembly, transportation, commissioning, use, and maintenance of the product, as well as en-
abling the rectication of simple malfunctions yourself.
TEKA Maschinenbau GmbH does not accept any liability for damage that is caused by failure
to observe information provided on the machine or in the operating instructions.
The operating instructions must be supplemented by the operating company of the machine
with instructions based on existing national regulations on accident prevention and environ-
mental protection.
In addition, observe all generally valid legal and other binding regulations of European or na-
tional law as well as any stipulations on accident prevention and environmental protection that
apply in your country.
1�5 Information for the operating company
As the operating company of the mixer, you are responsible for the following:
● Providing operating personnel and maintenance personnel with technical instruction
● Ensuring the proper use of the mixer
● Observing safety requirements
● Work safety and accident prevention
● Making sure that safety equipment works properly and is maintained
● Ensuring that personnel are familiar with the operating instructions
● Ensuring that checking and servicing intervals are observed (see the checking and mainte-
nance schedule)
● Regular checking of the state of wear parts.
To Next Page
Loading...