Page 23 of 957.10-00110b_en
Safety
2�12�1 Hinged segment with safety switch
The maintenance openings of the mixer cover are equipped with electronic or electro-mechan-
ical safety switches.
NOTICE
► Please note the enclosed operating manual for the safety eva-
luation unit�
The switches must be integrated in the electrical safety chain in such a way that the machine is
switched o when the cover is opened. After the cover is closed, start-up may only take place
following acknowledgement on the control panel.
When other safety systems than those approved by TEKA are used, national regulations must
be observed.
.
Fig. 17: Hinged segment with safety switch
1 Safety switch
To Next Page
Loading...