Teka THZ 375 - Lubrication Schedule

Page 80 of 95
7.10-00110b_en
Maintenance
10�3 Lubrication schedule
Lubrication points Lubrication
type
Lubricant
grade
Specication
Mixing arm bearing Grease nipple,
every 50 operating
hours
Lubricating
grease
KP 2 K-30 lithium soap
grease
Discharge swivel drive Grease nipple,
relubricate each day
Lubricating
grease
KP 2 K-30 lithium soap
grease
Drive motor Grease filling Lubricating
grease
KP 2 K-30*) lithium soap
grease
Main transmission/hy-
draulics
Oil filling:
First oil and filter
replacement after 100
operating hours, then
every approx. 1,500
hours
Transmis-
sion oil
MIL-L 2105 B/C/D
API GL-5, SAE 90,
80 W-90
Hydraulic unit
(optional)
Oil filling:
First oil replacement
after 100 operating
hours, then every ap-
prox. 1,500 hours
Hydraulic oil HLP 68
Central section sealing
(optional)
Grease nipple,
every 500 operating
hours
Lubricating
grease
KP 2 K-30 lithium soap
grease
*) See the operating instructions of the motor manufacturer