TESTO Saveris User Manual

8 Tips and assistance
156 0970 4020 en 01 testo AG
Meaning of the LED displays at the probes".
If this is not the case and the probe flashes red, the
configuration of the probe is faulty. Reconnect the probe
and reconfigure it.
2. Only the battery symbol and the symbol of the radio
quality appear on the display of my probe.
The probe has not yet received a valid configuration.
Connect the probe to the base and execute the startup
assistant.
3. Despite the proper connection of a probe, I do not
receive readings after the probe was placed at its
location.
Press the button on the rear of the probe. If the LED on the
front flashes red, the probe is outside of the radio range.
• Install a router in the system and assign the probe to the
router using the startup assistant (see "Integrating
Saveris router (optional)") or
• Place the probe at a suitable location so that the probe is
within the radio range.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery