8 Tips and assistance
0970 4020 en 01 157
4. A probe is too far away from the Saveris base. Even
integrating a router was unsuccessful. Can I connect
multiple routers in series to extend the radio range?
No, connecting multiple routers in series is not possible. To
bridge the transmission path, you have the option of using a
router and a converter and creating the connection from the
converter to the Saveris base using an Ethernet cable.
5. Can the data transfer from the radio probes to the base
be influenced by other instruments communicating by
radio?
A disruption of the transfer by other radio subscribers that
operate with the same radio frequency as the Saveris
system is not impossible. However, routines were
implemented in the Saveris system that prevent the loss of
data. The data are transferred via an intelligent protocol that
can head off faults or only transfers data when the radio
frequency is free.
6. What must I take into account when placing the
individual components?
The local conditions must be taken into account for the
placement. The radio is obstructed by objects such as thick
walls made of reinforced concrete, metal doors etc.
You can seek out suitable locations using a radio probe.
Briefly press the button on the rear of the probe to show the
current radio quality by means of the LED; see "
To Next Page
Loading...
Need help?
General
