TESTO Saveris User Manual

5 First steps
0970 4020 en 01 43
5. Enter the PIN and the number of the SMS centre in the
fields of the same name.
You can find the PIN and the number of the SMS centre
in the documents for your SIM card.
- The list of the probes registered in the Saveris base is
shown.
The fields of the
Channel name column for probe
designations are required fields. You must fill in these
fields to be able to continue with the startup.
The
Lower limit and Upper limit fields are already
preassigned limit values, but you can adapt the limit
values to your requirements.
The limit values determine as of which reading the
Saveris base triggers an alarm.
6. Click in the Channel name field and enter the designation
of the probe, e.g. "Room 1".
Assign channel names that are not longer than 15
characters.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery