TESTO Saveris User Manual

5 First steps
0970 4020 en 01 59
1. Under Start | All Programs | Testo click on Saveris
Startup Assistant
.
- The welcome dialogue of the startup assistant is shown.
2. Click on [Continue >].
- The
System status dialogue with the General tab is shown.
3. Change to
Router tab.
The
Direct connection type means that the probe is
connected directly in the Saveris base or a converter.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery