TESTO Saveris User Manual

5 First steps
0970 4020 en 01 75
8. Determine the issue options for the limit value alarms.
Possible options:
•
SMS (optional with Saveris base with GSM module)
• E-mail
•
Relay of the Saveris base.
The notification function via
SMS is only available if the
Saveris base is equipped with a GSM module.
9. Click on [Continue >].
- The wizard is shown with the setting for the start of
measurement and the list of the newly registered probes.
10. Postpone the start of measurement, if necessary.
11. Click on [Finish] to complete the startup of the hardware.
- A note on the successful configuration of the hardware is
shown.
12. Press
[OK] to confirm the note.
- The new hardware is now ready for operation.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery