15. SETTING-OUT MEASUREMENT
94
8. Press [MEAS] to start distance
measurement. The target and the
distance of the point to be set out
is displayed (S-O
ΔHD).
9. Move the prism to find the point to
be set out.
10. Press {ESC} to return to <S-O>.
• When [LOAD] was used in step
4, the list of registered
coordinates is restored.
Continue setting-out
measurement.
• [REC]: records measurement
results
Recording method:
"28. RECORDING DATA -
TOPO MENU -"
S-O HD
dHA
HD
ZA
HA-R
MEAS
DISP
REC
To Next Page
Loading...
