19
5. BASIC OPERATION
Learn basic key operations here before you read each measurement procedure.
Location of operation keys on the panel : "4.1 Parts of the Instrument"
Power ON / OFF
Lighting up the display unit and key
Switching target type
Target type can be switched only on the screen where the target symbol (ex. )
is displayed.
Target symbol displayed: "5.2 Display Functions", Switching between target
types in the Star Key mode: "5.3 Star Key Mode", Switching the target type
in Config mode": "33.2 EDM Settings"
Switching the Laser-pointer/Guide light ON/OFF
Selecting laser-pointer/guide light: "33.2 EDM Settings"
• After turning ON the laser-pointer/guide light, the laser beam is emitted for 5
minutes, and then automatically switches OFF. But in the Status screen and
when target symbol (ex. ) is not displayed in the OBS mode, the laser beam
is not automatically turned off.
5.1 Basic Key Operation
{ON} Power On
{ON}
(Press and hold:
About 1 second)
Power Off
{} Switch the screen/key backlight and Reticle il-
lumination On / Off
{SHIFT} Switches between target types (Prism/Sheet/
N-Prism (reflectorless))
{} (Press and hold ) To turn the laser-pointer/guide light ON/OFF,
press and hold until a beep sounds.
To Next Page
Loading...
