38
10. CONNECTING TO EXTERNAL DEVICES
The ES supports Bluetooth wireless technology and RS232C for communication
with data collectors etc.
The Bluetooth module incorporated in the ES can be used for communication with
Bluetooth devices such as data collectors.
Bluetooth connection mode
Communication between a pair of Bluetooth devices requires one device to
be set as the "Master" and the other as the "Slave". To initiate connections
from the ES side, set the ES as the "Master" device. To initiate connections
from the paired device side, set the ES as the "Slave" device. Always set
the ES to "Slave" when connecting with a data collector to perform
measurements and to record the data. Only "Slave" can be selected when
the instrument is shipped.
• When restoring set items to initial settings, reconfigure the Bluetooth
communication settings.
PROCEDURE Set Bluetooth communication mode to "Slave"
1. Select "Comms setup" in Config
mode
2. Set "Wireless" to "Yes".
10.1 Necessary settings for Bluetooth
communication
Wireless :
: Yes
Bluetooth setup
Link device list
My device info
To Next Page
Loading...
