10. CONNECTING TO EXTERNAL DEVICES
40
• No changes for the setting'
"Mode", "Authentication" and
"Check sum" from the factory
setting are necessary as long as
connecting to a recommended
program on the data collector. If
connection can not be
established, check the
communication settings of ES
and the data collector.
"33.1 Configuration -Config
Mode- "Communication
Setup"", Output format and
command operations:
"Communication manual"
5. Press {ENT} to complete setting.
Proceed to Bluetooth
communication.
""10.2 Establishing a
connection between the ES
and paired Bluetooth device"
PROCEDURE Set Bluetoo th communication mode to "Master"
• When setting communication mode to "Master", companion devices should be
registered first. If companion devices have already been registered, proceed to
step 8.
1. Power on the Bluetooth
companion device.
• Keep the Bluetooth address of
the companion device which is
required when registering the
device to the ES.
ACK/NAK
CR,LF
ACK mode
:Standard
: No
:No
To Next Page
Loading...
