Topcon ES-101 - Page 267

257
33. CHANGING THE SETTINGS

Communication Setup
Select “Comms setup” in Config mode
Items set and options (*: Factory setting)
The setting effective when selecting "T types"
The setting effective when selecting "S types"

• "Wireless" is displayed on the models with Bluetooth module only.
• The followings are communication formats compatible with the ES.
Depending on the communication format used, select T type/S type.
Output format and command operations: "Communication manual"
Wireless Yes, No*
Baud rate 1200bps, 2400bps, 4800bps, 9600bps*,
19200bps, 38400bps
Data bits 8bit*, 7bit
Parity None*, Odd, Even
Stop bit 1bit*, 2bit
ACK/NAK Yes, No*
CR, LF Yes, No*
ACK mode Standard*, Omitted
Check sum Yes, No*
T type GTS (Obs / Coord), SSS (Obs / Coord)
S type SDR33, SDR2X
Wireless
Baud rate
Data bits
Parity
Stop bit
Check sum
: No
: 9600bps
: 8bit
: None
: 1bit
: No
ACK/NAK
CR, LF
ACK mode
: No
: No
: Standard