243
32. USING USB MEMORY DEVICE
:
• Do not remove the USB memory device during data read/write. Doing so will
cause data stored in the USB memory device or the ES to be lost.
• Do not remove the battery or turn off the power during data read/write. Doing so
will cause data stored in the USB memory device or the ES to be lost.
• Waterproofing property for this instrument is not secured unless the battery
cover and external interface hatch are closed, and the connector caps are
correctly attached. Do not use it with these open or loose, under the condition
where water or other liquid spills over the instrument.
PROCEDURE
1. Slide the catch on the external
interface hatch cover down to open.
2. Insert the USB memory device in the
respective slot.
• When using a USB memory with 4 metal
terminals on the surface, insert it with the
terminal facing backwards to avoid
damaging the USB port.
3. Close the cover.
Listen for the click to ensure that the
cover is properly closed.
32.1 Inserting the USB Memory Device
To Next Page
Loading...
