269
33. CHANGING THE SETTINGS
• Initialize the data. The following data is initialized.
Data within all jobs
Known point data within memory
Code data within memory
PROCEDURE Restoring set items to initial settings and
turning power on
1. Turn the power off.
2. While pressing {F4} and {B.S.},
press {ON}.
3. The ES is turned on, “Default set”
appears on the screen and all
items are restored to their initial
settings.
PROCEDURE Initializing the data and turning the power on
1. Turn the power off.
2. While pressing {F1}, {F3} and
{B.S.}, press {ON}.
3. The ES is turned on, “Clearing
memory...” appears on the screen
and all items are restored to their
initial settings.
To Next Page
Loading...
