10. CONNECTING TO EXTERNAL DEVICES
48
PROCEDURE Outputting JOB data to a host computer
1. Complete the necessary settings
for Bluetooth communication.
"10.1 Necessary settings for
Bluetooth communication"
2. Verify the current connection
status by checking the Bluetooth
icon in the OBS mode screen.
"10.2 Establishing a
connection between the ES
and paired Bluetooth device"
3. Output JOB data in Data mode.
"31.1 Outputting JOB Data to
Host Computer"
ES starts outputting data.
• If a connection has not yet been
established, the screen at right is
displayed. (Screens differ depending
on the "Mode" setting. The displayed
screen appears when "Mode" is set
to "Slave".)
After a connection has been
established, the data is output.
Comms output
Format SDR33
Sending 12
Comms output
Waiting for
connection...
To Next Page
Loading...
