Warranty
Warranty Period
One year from the date of shipment
Repairs during the Warranty Period
Failure occurs to the instrument when the instrument has been operated according to the instruction
manual and, the failure caused by design or manufacture will be repaired free of charge.
Repairs after Warranty Period
Repair after the warranty period is carried out if possible and have to be paid in full by the user.
Maintenance Period
The repair parts (*1) are retained by us for eight years (*2) after purchase.
The repairable period is this period that parts are kept in stock.
Even after the storage period has elapsed, there are cases in which repair may be possible, so contact
the dealer or TOPCON TECHNOHOUSE Corporation.
(*1) Maintence and repair parts are parts that are necessary to maintain the function of the
product.
(*2) We make our most effort to keep maintenance and repair parts in stock for the complete
storage period, however, due to some unexpected occurrence, the storage period may have
to be shortened.
Disposal
When disposing of the product, do so acoording to the local gorvernment ordinance regarding disposal
and recycling.
Perchlorate Material – special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Note; This is applicable to California, U.S.A only
When you ask for service, advice us of the following data.
· Manufacturing serial number Located on the Name plate on the bottom of the device.
· Period of use The date of purchase of the instrument, and date of last calibration.
· Operating conditions Type of light source measured, device settings, measurement values,
measurement state, etc.
· Problem Decription of the trouble as much detail as possible.
Make inquiries to the address indicated on the base of the instruction manual.
To Next Page
Loading...
Need help?
General
