Topcon SR-LEDW - Open and Shut a Finder Shutter

- 12 -
Flip the power switch to the left side to turn off the power.
1.3.5 Open and shut a Finder Shutter
When the brightness of the object is very low or when there is a light emitting object on the finder side,
set the finder shutter to "CLOSE" to prevent extra light from being dispersed by the finder.
FINDER SHUTTER
OPEN
CLOSE
This is the "OPEN" condition and you
can observe through the finder.
This is the "CLOSE" condition and the
light sent from the finder is shielded.
← OFF
FUNCTION
SHIFT
LAMP
FIELD
DIF.
DC IN
POWER