- 64 -
3.20 Panel Light Control
It is possible to control the ON/OFF status of LCD screen and switch LED automatically.
When measuring with this function, low light emitted from LCD Screen or switch LED does not
affect measurement. Finally, it is available to measure with high precision.
Use the following procedure to set.
1 Switch to the function mode to display the [DISPLAY]-[Auto Panel Light].
☞
'3.1.2 Entering/Returning from the Function Mode'
2 Press the [CHANGE] switch.
3 Press the [ROTATION] switch to select the desired value.
Each time the switch is pressed, the value changed between on and off.
4 Press the [ENTER] switch to accept the displayed value.
This function can reduce power consumption.
To Next Page
Loading...
