- 65 -
3.21 Batch Deletion of Measurement and DIF
Standard Data
Delete all measurement data and DIF. standard data in one batch.
Use the following procedure for batch deletion:
1 Switch to the function mode to display the [MAINTAIN]-[Memory AllClear].
☞
'3.1.2 Entering/Returning from the Function Mode'
2 To delete all the measurement data, press the [CHANGE] switch. To delete all the DIF. standard
data, press the [ROTATION] switch.
The batch data deletion screen will display.
The above screen is for measurement data. The batch data deletion screen is similar.
3 Press the [SHIFT] switch.
All the measurement data will be deleted and the previous screen will display.
To leave the batch deletion screen without deleting, press the [CHANGE] switch
without pressing the [SHIFT] switch. After the batch deletion, the deleted data
cannot be restored. Be careful.
To Next Page
Loading...
