Topcon SR-LEDW - Page 44

- 33 -
5 Press the [CHANGE] switch. The cursor will be lit in the input stand-by status.
＊ Ｉｎｔｅｇ Ｔｉｍｅ Ｉｎｐｕｔ ＊
Ｉｎｔｅｇ[ｍｓ]＝
6 To input the value which user wants to set, use the [ROTATION] switch.
＊ Ｉｎｔｅｇ Ｔｉｍｅ Ｉｎｐｕｔ ＊
Ｉｎｔｅｇ[ｍｓ]＝ １
7 To move to the next digit, press the [SHIFT] switch.
＊ Ｉｎｔｅｇ Ｔｉｍｅ Ｉｎｐｕｔ ＊
Ｉｎｔｅｇ[ｍｓ]＝ １
8 Repeat step 6 and 7 to input a desirable value.
9 After inputting, press the [ENTER] switch to decide the value.
・ If a input value exceeds the limit, go back to step 5. Re-enter the number.
・ When failing in way input, please even do step 9 and redo from step 5.
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
Note