139
BASIC OPERATIONS
2 Press the and start the measurement.
THE IMAGE OF THE PATIENT'S EYE DISPLAYED ON THE MONITOR IS NOT CLEAR
1 Check if the patient's forehead is pressed against the forehead rest. If not, move the fore-
head forward.
2 If the patient's eye and the main body are not aligned, tilt the control lever to the patient
side, move the main body slowly toward the patient's eye and get it focused.
3 If the patient's eye and the main body are too close, tilt the control lever to the operator
side, move apart the main body slowly from the patient's eye and get it focused.
MEASUREMENT switch
To Next Page
Loading...
