5
Icon Description Page
To avoid injury in changing the measurement mode, do not place
fingers into the measuring opening.
* Inform the patient accordingly
8
90
96
109
To avoid injury, when moving the chinrest up/down, keep fingers
away from moving parts.
8
To avoid injury, do not install the instrument on a slope or on an
unstable place.
33
To avoid electrical shock, do not handle the power plug with wet fin-
gers.
34
To avoid failure or potential injury, do not open the printer cover
while the printer is in operation.
86
159
To avoid potential injury in case of malfunction, including a paper
jam, be sure to shut off the power before attempting to repair it.
86
159
Never insert your fingers under the chinrest.
* Inform the patient of this, too.
Careless insertion of fingers may cause injury by pinching.
98
113
Do not use or apply any spray-type cleaner near the instrument.
If the cleaner remains inside the measuring nozzle, the patient's
eye may be injured during measurement.
161
When operating the instrument, be careful not to touch the patient's
eye or nose.
8
When moving the instrument, be sure to hold it at the base with two
persons. Carrying by one person may cause harm to his back or
injury by falling parts. Also, holding areas other than the base may
cause injury, as well as damage to the instrument.
33
CAUTION
To Next Page
Loading...
Need help?
General
