33
PREPARATIONS
PREPARATIONS
INSTALLING THE INSTRUMENT
1 Hold the instrument body firmly at the specified positions and place it on the automatic
instrument table.
For the automatic instrument table, see "OPTIONAL ACCESSORIES" on page 164.
2 Place the instrument horizontally, with care not to trample cables.
CAUTION
When moving the instrument, be sure to hold it at the base with
two persons. Carrying by one person may cause harm to his
back or injury by falling parts. Also, holding areas other than
the base may cause injury, as well as damage to the instru-
ment.
CAUTION
When setting an instrument on an instrument table, pay atten-
tion not to injure the patient's fingers between the instrument
and the table.
CAUTION
To avoid injury, do not install the instrument on a slope or on an
unstable place.
Holding positions Holding the instrument
To Next Page
Loading...
Need help?
General
