Topcon TRK-1P - Measurement Under Auto Mode (REF;KRT Mode)

69
PREPARATIONS
3 The SETTING MENU (R/K) screen or the SETTING MENU (T/P) screen is displayed.
4 To return to the MEASUREMENT screen, press .
SETTING MENU (R/K)
SETTING CONT. MEAS. (CONTINUOUS MEASUREMENT)
Continuous measurement can be set. Before shipment, it is set to "ON" (continuous measure-
ment).
1 Press the of the control panel and get the "SETTING MENU (R/K)
screen." "CONT. MEAS." is highlighted, and "ON" and "OFF" are displayed on the right.
The cursor shows the set content.
2 Press the Set value change button or and bring the cursor to "ON" for contin-
uous measurement.
ON (continuous measurement)
OFF(do not execute continuous measurement)
3 Press the Set item change button ; the cursor moves to the next item (DATE/TIME).
4 To exit from the menu, press and return to the MEASUREMENT screen.
EXIT
MENU button
EXIT