155
INDIVIDUAL OPERATIONS
INPUT/OUTPUT USING RS-232C
OUTPUT USING RS-232C
This instrument can output data to PC and the like via the RS-232C interface.
1 Make sure that the connection is to the RS-232C OUT.
For connection, see "CONNECTING EXTERNAL I/O TERMINALS" on page 35.
2 Check settings for data communication.
For data communication settings, see "ON-LINE SETTING (DATA COMMUNITATION)"
on page 61.
3 Perform measurements.
4 Press the of the control panel.
When output is completed, "RS-232C DATA OUT" is displayed on the monitor screen.
INPUT USING RS-232C
This instrument can input ID numbers from a bar code reader and the like via the RS-232C
interface.
1 Make sure that the connection is to the RS-232C IN.
For connection, see "CONNECTING EXTERNAL I/O TERMINALS" on page 35.
2 Check settings for data communication.
For data communication settings, see "ON-LINE SETTING (DATA COMMUNITATION)"
on page 61.
3 Make sure the MEASUREMENT screen is on.
4 Input ID numbers from the external device.
Input ID numbers are displayed in the screen.
PRINT button
To Next Page
Loading...
