93
BASIC OPERATIONS
TYPE OF MEASUREMENT TO BE DONE UNDER TONO/PACHO MEASURE-
MENT MODE
Select the type of measurement to be done under the TONO/PACHO mode.
In the TONO/PACHO measurement mode screen, press the
of the control panel and select the desired type of
measurement.
T/P measurement mode : Both TONO mode (ocular pressure measurement) and
PACHO mode (cornea thickness measurement) are done
continuously. The PACHO mode is previously done, and
after it ends, TONO mode is done.
TONO measurement mode : Only TONO mode (ocular pressure measurement) is done.
PACHO measurement mode : Only PACHO mode (cornea thickness measurement) is
done.
In the initial setting the TONO measurement mode is set, but this can be changed.
For details, see page 83.
MEASUREMENT MODE button
To Next Page
Loading...
Need help?
General
