83
PREPARATIONS
SETTING THE MEASUREMENT MODE UNDER TONO/PACHO MODE
It is possible to set the measurement mode under the TONO/PACHO mode after power-on.
Factory setting, it is set to "ocular pressure" (TONO measurement mode).
1 Press the of the control panel and get the "SETTING MENU (T/P)
screen." "DATE/TIME" is highlighted, and date/time is displayed on the right.
2 Press of the Set item change button and bring the cursor to " INITIAL MODE."
The measurement mode is displayed on the right and the set item is highlighted.
3 Press or of the Set value change button and bring the cursor to the desired
measurement mode.
“TONO”: Ocular pressure measurement mode
“PACHO”: Cornea thickness measurement mode
“T/P”: Continuous measurement under ocular pressure mode and cornea thickness
measurement mode
4 Press of the Set item change button to move the cursor to the next item (MESSAGE
INPUT). Or, press of the Set item change button to move the cursor to the previous
item (AVERAGE MODE).
5 To quit the menu, press ; the MEASUREMENT screen is returned.
MENU button
EXIT
To Next Page
Loading...
Need help?
General
