Topcon TRK-1P - The Nozzle Limit Appears and Measurement Is Not Possible

86
PREPARATIONS
SETTING THE PRINTER PAPER
1 Press the printer cover OPEN button and open the printer cover.
CAUTION
To avoid potential injury, do not touch the printer body while the
printer is in operation or when replacing the printer paper.
CAUTION
To avoid failure or potential injury, do not open the printer cover
while the printer is in operation.
CAUTION
To avoid potential injury in case of malfunction, including a
paper jam, be sure to shut off the power before attempting to
repair it.
MEMO
• Note that printing cannot be done if the paper back faces up by setting
the roll in opposite direction.
MEMO
• Please insert the paper deep enough into the printer.
• Otherwise the paper may not come out. At this time "PAPER END" will
be displayed on the monitor.
To avoid failure in the printer when opening, do not hold any part of the cover. Be
sure to open the printer by pressing the opening button for the cover.