89
PREPARATIONS
3 Vertical movement
When the control lever is rotated, the measuring head moves up and down. Turning the
lever clockwise will raise the measuring head and turning counterclockwise lowers it.
4 Measurement operation
Pressing the Measurement switch at the top of the control lever will start measurement.
During the AUTO measurement, continuously pressing the Measurement switch will effect
the following movements:
REF/KRT measurement: The buzzer rings twice and the automatic measurement stops.
TONO/PACHO: While the Measurement switch is being pressed, automatic
measurement does not start even when alignment is reached,
and starts when the switch is released.
To Next Page
Loading...
