UEi RACKtangle DNR-12-1G Series User Manual

DNR-X-1G Series RACKtangle and HalfRACK Systems
Chapter 1 2
Introduction
October 2018 www.ueidaq.com
508.921.4600
© Copyright 2018
United Electronic Industries, Inc.
Manual Conventions
To help you get the most out of this manual and our products, please note that
we use the following conventions:
Tips are designed to highlight quick ways to get the job done, or reveal
good ideas you might not discover on your own.
NOTE: Notes alert you to important information.
CAUTION! advises you of precautions to take to avoid injury, data loss, and
damage to your boards or a system crash.
Text formatted in bold typeface generally represents text that should be entered
verbatim. For instance, it can represent a filenames, as in the following example:
“You can instruct users how to run setup using setup.exe executable.”
Bold typeface will also represent button names, as in “Click Scan Network.”
Text formatted in fixed typeface generally represents commands,
source code, or other text that should be entered verbatim into the source code,
initialization, or other file or at a command prompt.
Before you begin:
Before plugging any I/O connector into the chassis or board(s), be sure to
remove power from all field wiring. Failure to do so may cause severe
damage to the equipment.
No HOT SWAP
Always turn POWER OFF before performing maintenance on a UEI system.
Failure to observe this warning may result in damage to the equipment and
possible injury to personnel.
Usage of Terms
Throughout this manual, the term “Cube” refers to either a PowerDNA Cube
product or to a PowerDNA RACKtangle
rack mounted system, whichever is
applicable.
Additionally throughout this manual, the following conventions apply:
• “DNR-X-1G” refers to both DNR-12-1G and DNR-6-1G types of
systems. The DNR-12-1G can accept up to 12 I/O boards and the
DNR-6-1G can accept up to 6 I/O boards. The two models are identical
in all other respects.
• Unless otherwise noted, “DNR-X-1G” applies to all versions of the
RACKtangle and HalfRACK systems: DNR-X-1G (-00/-01),
DNR-X-1G-02, and DNR-X-1G-03. Differences between product
versions are noted on the following page.
Note that the -02 product version is a fully compatible upgrade of the
-00/-01 version.

UEi RACKtangle DNR-12-1G Series Specifications

General

Brand	UEi
Model	RACKtangle DNR-12-1G Series
Category	Network Hardware
Language	English