DNR-X-1G Series RACKtangle and HalfRACK Systems
Chapter 6 102
Programming CPU Board-specific Functions
October 2018 www.ueidaq.com
508.921.4600
© Copyright 2018
United Electronic Industries, Inc.
6.4.7 Display Power
Diagnostics
Command
Typing simod 5 at the serial prompt displays diagnostic information about the
DNR-X-1G Power and CPU boards. This diagnostic information includes actual
voltage readings on each of the 2.5V, 24V, 1.2V, 3.3V, and 1.5V supplies, as well
as actual temperature and current measurements.
DQ> simod 5
DNR_PWR layer diagnostics
2.5DNR= 2.523* 2.5NIC= 2.511* 3.3DNR= 3.322* 3.3NIC= 3.312*
24DNR=24.078* 24NIC=24.164* Vin=22.717* 1.5DNR= 1.580*
1.2DNR= 1.294* Vfan= 8.869* Iin= 1.151* Temp1=29.766*
Temp2=25.063*
DNR_PWR_1G layer diagnostics
2.5DNx= 2.517* GND1= 0.000*
3.3DNx= 3.315* U-Cap= 0.022*
24DNx=24.249* Vin=23.896*
1.5DNx= 1.574* 1.2DNx= 1.273*
VfanX= 0.022! Iin= 0.210*
I 3.3= 0.752* I 1.5= 0.008!
Temp1=31.998* Temp2=31.996*
Unit logged 1146.0 hours
DQ>
Note that readings displayed under “DNR_PWR layer diagnostics” show
diagnostics for the DNR-POWER-DC Module (refer to Section 2.6 on page 17
for more information about this board).
Readings displayed under “DNR_PWR_1G layer diagnostics” show
diagnostics for the DNR-CPU/NIC Module (refer to Section 2.7 on page 21 for
more information).
To Next Page
Loading...
Need help?
General
