DNR-X-1G Series RACKtangle and HalfRACK Systems
Chapter 4 50
Installation and Configuration
October 2018 www.ueidaq.com
508.921.4600
© Copyright 2018
United Electronic Industries, Inc.
4.6 Updating
Firmware
This section provides the following information updating the firmware for
DNR-X-1G RACKtangle/HalfRACK (i.e., RACK) systems:
• Determining Currently Installed Firmware Version (Section 4.6.1)
• Updating Firmware via PowerDNA Explorer (Section 4.6.2)
• Updating Firmware via Serial Interface (Section 4.6.3)
The CPU/NIC module in a DNR-X-1G stores the system firmware.
Updated firmware is periodically released to introduce new features and to
improve the performance of existing features. Updated firmware releases are
bundled with the full PowerDNA Software Suite, available for download at any
time from the UEI web site (www.ueidaq.com).
To locate the latest UEI firmware after installing the PowerDNA Software Suite,
browse to the installation’s Firmware directory,
(e.g. C:\Program Files (x86)\UEI\PowerDNA\Firmware).
The directory contains the following:
• an MTTTY executable (serial terminal application)
• two sub-directories containing the firmware
Locate the firmware in the GigE system directory: this is the Firmware_PPC_1G
subdirectory and the rom image file with extension MOT.
To Next Page
Loading...
Need help?
General
