UEi RACKtangle DNR-12-1G Series User Manual

DNR-X-1G Series RACKtangle and HalfRACK Systems
Chapter 6 95
Programming CPU Board-specific Functions
October 2018 www.ueidaq.com
508.921.4600
© Copyright 2018
United Electronic Industries, Inc.
6.4.2 Show System
Parameters
Command
The show command is one of the most frequently used commands.
show provides a list of DNR-X-1G system parameters:
DQ> show
name: "IOM-12345 "
model: 3006
serial: 0162789
option: 0001
fwct: 1.2.0.0
mac: 00:0C:94:02:7B:E5
srv: 192.168.100.2
ip: 192.168.100.100 (1Gbit)
gateway: 192.168.100.1
netmask: 255.255.255.0
mac2: 00:0C:94:F2:7B:E5
srv2: 192.168.100.102
ip2: 192.168.100.102 (DOWN)
gateway2: 192.168.100.1
netmask2: 255.255.255.0
udp: 6334
license: "▒"
bond prm: bonding mode: FFFFFFFF
Manufactured 7/27/2016
Calibrated 7/27/2016
To change parameters, use the “set” command (type set <Enter> for “set”
command syntax).

UEi RACKtangle DNR-12-1G Series Specifications

General

Brand	UEi
Model	RACKtangle DNR-12-1G Series
Category	Network Hardware
Language	English