DNR-X-1G Series RACKtangle and HalfRACK Systems
Chapter 2 4
The DNR-12-1G Series RACKtangle System
October 2018 www.ueidaq.com
508.921.4600
© Copyright 2018
United Electronic Industries, Inc.
Chapter 2 The DNR-12-1G Series RACKtangle
System
This chapter provides the following information about the DNR-12-1G Series
RACKtangle
system:
• PowerDNR DNR-12-1G System Overview (Section 2.1)
• DNR-12-1G Specifications (Section 2.2)
• DNR-12-1G Key Features (Section 2.3)
• DNR-12-1G RACKtangle Enclosure (Section 2.4)
• DNR-12 Power, NIC/CPU, and I/O Boards LEDs & Controls
(Section 2.5)
• DNR-POWER-DC Module (Section 2.6)
• DNR-CPU/NIC Module (Section 2.7)
• DNR-Buffer Module (Section 2.8)
• DNR I/O Boards (Section 2.9)
• DNR-12-1G DC Power Thresholds (Section 2.10)
NOTE: For a list of product versions available for the DNR-12-1G Series
RACKtangle systems, refer to Section 1.2 on page 3.
2.1 PowerDNR
DNR-12-1G
System
Overview
UEI PowerDNR DNR-12-1G RACKtangle systems are rack-mounted versions
of the PowerDNA Cube Ethernet-based data acquisition systems.
The DNR-12-1G houses a PowerDNA data acquisition system in a rack
enclosure with cabling, installation hardware, LEDs, and a power switch
accessible from the front of the rack chassis. Multiple DNR-12-1G systems may
be mounted in a single rack. All standard DNA- Cube I/O boards are also
available in DNR- RACK versions for use in DNR-12-1G systems.
Figure 2-1. Typical DNR-12-1G RACKtangle System
To Next Page
Loading...
Need help?
General
