Unify OpenScape CP600 - Using a Bluetooth Device; Incoming HFAG Call; Connected HFAG Call

133
Using a Bluetooth device
You can control calls on the HFAG (hands-free audio gateway, e.g. mobile de-
vice) from your OpenScape CP 600 phone via Bluetooth.
Incoming HFAG call
Bluetooth status bar icon indicates an HFAG call.
For more information about how to proceed during incoming call, see ”Receiving
a call”  Page 95.
Connected HFAG call
Bluetooth status bar icon indicates an HFAG call. The “End audio” button trans-
fers the HFAG call audio from the OpenScape CP600 to the HFAG.
Once your mobile device is connected to CP600 through the Bluetooth,
you can see the mobile’s battery level on the top of your CP600 main menu
screen.
Ankommende
Beantworten
Ableh-
Bee
End audio
Kontaktdaten
Verlauf