Unify OpenScape CP600 User Manual

154
Hold a call on a line/trunk key and then accept again
Prerequisite: You are conducting a call via one of your group's lines.
Holding
Press the key if it is set up.
if nec.
\
Replace the handset.
or
Press the key if it is set up.
As required per configuration (ask relevant Administrator), so that other team
members can also accept the call on hold.
Accept again
Press the slowly flashing line/trunk key.
Alternately phone on several lines
Prerequisite: You are conducting a call via one of your group's lines. Another
line key flashes.
Press the flashing line key. The first call partner is waiting on the other line.
Press the slowly flashing line/trunk key. Second call partner waiting.
You can change as often as you like. Press the slowly flashing line key.
Holding -
_
Disconnect -
_
Ln -
£
Ln -
£
Ln -
£

Unify OpenScape CP600 Specifications

General

Ethernet Ports	2 x 10/100/1000 Mbps
HD Voice	Yes
Display	Color TFT Display
Resolution	480 x 272 pixel
Connectivity	Gigabit Ethernet
Audio	HD Voice
Keys	4-way navigator key
Power	PoE (802.3af)
Protocols	SIP
Headset	EHS
USB Port	USB 2.0
Bluetooth	Optional
Supported Codecs	G.711, G.722, G.729