194
Door opener
Activating the Door opener
Prerequisite:Door opener has been enabled by your administrator.
At first you have to set up a programmable key to open a door.
See also at ïƒ page 93 that explains how to set up a local feature.
Hold down the Function key on the OpenScape Key Module 600 to which you
want to assign the door until the programming prompt is displayed.
or
@ If nec. Press Main Menu key.
Open using the Softkey.
Select desired page (1 to 4).
Press and hold the Function key to which you want to assign the door.
€ Select "Assign local feature"
Confirm.
Confirm.
Confirm. The key is programmed.
Opening the door without receiving a call
Prerequisite:The functionality has to be enabled by your administrator.
When you have configured a programmable key to open the door, you can press
the relevant Softkey to open the door for your visitor without receiving a call from
the door phone.
Press the Function key on the OpenScape Key Module 600 to which the door
has been assigned.
or
@ If nec. press Main Menu key.
Open using the Softkey.
Select desired page (1 to 4).
Press the Function key to which the door has been assigned. The door opens.
In case there is a problem with the communication with the door, you will see a
pop-up message on your device screen.
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
_
Assign local feature
-
_
Door opener
-
_
Door Opener 1
Q
_
Door Opener 1
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
Door Opener 1
_
To Next Page
Loading...
Need help?
General
