Unify OpenScape CP600 User Manual

75
Deactivate the ringer
If you do not want to be disturbed by the phone ringing for an incoming call, you
can switch the ringer off.
Deactivating
*
Hold down the key until the "ringer off" icon appears.
Activating
*
Hold down the key until the "ringer off" icon goes out.
Mute active ringer
* You can mute the active ringer for an incoming call and only for that call. Long
press the key while the phone is ringing and only the active ringer is muted. Rin-
ger mode is not changed.
If you want to change the ringer mode, see the section ”Deactivating”  Page 75
and ”Activating”  Page 75.
Activate alert tone
You can turn the ringer off and select a short alert tone instead.
* Hold down the key until the notification and icon for "Activate alert tone" appears
on the display.
Ringer off
Ringer on
Activate alert tone

Unify OpenScape CP600 Specifications

General

Ethernet Ports	2 x 10/100/1000 Mbps
HD Voice	Yes
Display	Color TFT Display
Resolution	480 x 272 pixel
Connectivity	Gigabit Ethernet
Audio	HD Voice
Keys	4-way navigator key
Power	PoE (802.3af)
Protocols	SIP
Headset	EHS
USB Port	USB 2.0
Bluetooth	Optional
Supported Codecs	G.711, G.722, G.729