Unify OpenScape CP600 - Insecure Call Alert; Block Dialing for Outgoing Calls

207
Insecure call alert
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Activate with the Softkey Insecure call alert.
or
Deactivate with the Softkey Insecure call alert.
Save setting.
Block dialing for outgoing calls
If block dialing is displayed, when deleting a phone number, for example, all of
the characters available in the field are deleted at once. If block dialing is swit-
ched on, you can delete individual characters.
z You can also configure this setting via the Web interface  page 217.
@ If nec. Press Main Menu key.
Open using the Softkey
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Activate with the Softkey Block dialing.
or
Deactivate with the Softkey Block dialing.
Save setting.
Service/Settings
_
$
User:
-
_
$
Configuration
-
_
Existing connections
-
_
Insecure call alert
¦
_
Insecure call alert
¢
_
Q
_
Service/Settings
_
$
User:
-
_
$
Configuration
-
_
Outgoing calls
-
_
Block dialing
¦
_
Block dialing
¢
_
Q
_