Unify OpenScape CP600 User Manual

158
Forwarding calls for lines
You can immediately forward internal and/or external calls to your lines to diffe-
rent internal or external phones (destinations).
If you activate call forwarding for a line, this shall apply to all line keys of your
group for this line.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open with softkey.
Open with softkey.
€ Select "Frwrdng. MULAP on".
Confirm.
or
If available, press the key. (You have incompletely saved the "Fwd. MULAP" key
without type and destination of the forwarding  page 84).
Press the required line key.
or
j
Enter and confirm the desired line/trunk number.
Confirm.
or
€ Select "2=only external calls".
Confirm the option shown
or
€ Select "3=only internal calls".
Confirm.
j Enter the destination number.
Confirm.
or
If available, press the key. (You have also saved the type and destination of the
forwarding to the "Fwd. MULAP" key,  page 84.)
Service/Settings
_
Service menu
-
_
Destinations
-
_
Frwrdng. MULAP on
_
Fwd. MULAP -
_
Ln.
-
_
1=all calls
_
2=only external calls
_
3=only internal calls
_
save
_
Fwd. MULAP -
_

Unify OpenScape CP600 Specifications

General

Ethernet Ports	2 x 10/100/1000 Mbps
HD Voice	Yes
Display	Color TFT Display
Resolution	480 x 272 pixel
Connectivity	Gigabit Ethernet
Audio	HD Voice
Keys	4-way navigator key
Power	PoE (802.3af)
Protocols	SIP
Headset	EHS
USB Port	USB 2.0
Bluetooth	Optional
Supported Codecs	G.711, G.722, G.729